Login to your account
Don’t have an account?
Create a Free Account
Shoulder Videos: AC Joint
Arthroscopic Coracoclavicular Ligament Reconstruction Using Graft Augmentation and Titanium Implants
Several techniques have been introduced to treat acromioclavicular separation with coracoclavicular ligament reconstruction using graft augmentation. A modified arthroscopic technique for coracoclavicular ligament reconstruction was used based on a previous technique where the supportive device and tendon graft share the clavicular and coracoid drill holes. A notable problem with the previous technique was large protruding suture knots on the washer and clavicle, which could predispose to wound infection.Distal Clavicle Fracture Repair Using Cortical Button Fixation With Coracoclavicular Ligament Reconstruction
Management of distal clavicle fractures remains controversial. Various treatment options have been described including open reduction and internal fixation with hook plate fixation, tension band wiring, screw fixation, and distal locking plates. Many of these techniques are associated with a high perioperative complication rate. We describe a surgical technique that allows indirect fixation of distal clavicle fractures and reconstruction of the CC ligaments without the use of prominent hardware.Revision Acromioclavicular-Coracoclavicular Reconstruction: Use of Precontoured Button and 2 Allografts
Injuries to the acromioclavicular (AC) joint are common, particularly in the young and active population. Approximately 9% of all shoulder girdle injuries involve the AC joint, and AC joint dislocations represent approximately 8% of all joint dislocations throughout the body. AC joint injuries are graded as type I through type VI according to the Rockwood classification. Type I and II injuries are typically treated nonoperatively, whereas type IV, V, and VI injuries are most often treated surgically.Bipolar Acromioclavicular Joint Resection
Acromioclavicular (AC) joint arthropathy remains one of the most common causes of shoulder pain. In the case of AC joint arthropathy resistant to conservative treatment, most authors have recognized distal clavicle resection as the gold-standard treatment. However, some challenges remain to be solved. One is the difficulty in visualization of the superior and posterior part of the distal clavicle from the midlateral portal, causing an incomplete resection of the distal clavicle. This could potentially lead to unresolved pain and therefore surgical failure.Acromioclavicular Joint Dislocation: Repair Through Open Ligament Transfer and Nonabsorbable Suture Fixation
Acromioclavicular (AC) joint instability is a fairly common and particularly limiting injury that may result in persistent pain and reduced quality of life. In most cases, conservative management is successful. However, in the case of a severe AC joint dislocation, surgical intervention may be warranted. Previous surgical techniques for treatment of AC joint instability include screw fixation between the coracoid and clavicle, coracoacromial ligament transfer from its acromial insertion to the clavicle, and reconstruction of the coracoacromial and/or coracoclavicular ligaments.A Single-Tunnel Technique for Coracoclavicular and Acromioclavicular Ligament Reconstruction
Acromioclavicular (AC) joint separation is a common injury seen in the young adult athletic population. Both the indications for surgical management and the best operative technique remain controversial. One of the most popular reconstruction techniques is the anatomic double-tunnel coracoclavicular (CC) ligament reconstruction. However, there have been several case reports of clavicle fractures with this technique. This article presents a single-tunnel reconstruction technique that aims to restore both the CC and AC ligament function, while minimizing fracture risk.Surgical Technique for Arthroscopy-Assisted Anatomical Reconstruction of Acromioclavicular and Coracoclavicular Ligaments Using Autologous Hamstring Graft in Chronic Acromioclavicular Joint Dislocations
Injuries to the acromioclavicular (AC) joint are becoming common with contact sports and bike accidents. It is well known that in AC dislocations, the first structure to fail is the AC capsule followed by the trapezoid and conoid ligaments. The function of these ligaments must be restored to restore the anatomy and physiology of the AC joint to get the best results. Until now, no technique has emerged as the gold standard for restoration of the AC joint anatomy and function. In our technique, the stress is on recreating the anatomy to make it more individualized based on individual variations.All-Arthroscopic Coracoclavicular Ligament Reconstruction Surgical Technique Using a Semitendinosus Allograft and Tenodesis Screws
Acromioclavicular joint injuries account for 9% of shoulder girdle injuries and are most often associated with direct blows to the shoulder or axially directed forces onto the ipsilateral extremity. Type IV, V, and VI injuries are generally managed surgically, whereas type I and II injuries are treated with sling immobilization, early shoulder range of motion, and physical therapy. Type III injuries are more controversial but are generally managed surgically in the active and high-demand patient.Arthroscopic Excision of a Symptomatic Meso-acromiale
The surgical technique for the management of a symptomatic os acromiale remains unclear. Several operative techniques have been described including open excision, open reduction–internal fixation (ORIF), arthroscopic acromioplasty or subacromial decompression, and arthroscopic excision. There are 4 types of os acromiale, with the meso-acromion being the most common and difficult to treat. The excision of a pre-acromion arthroscopically or in an open manner usually produces satisfactory results. However, the open excision of a meso-acromion can lead to persistent pain and deltoid weakness and atrophy.Arthroscopic Technique for Stabilization of Chronic Acromioclavicular Joint Instability With Coracoclavicular and Acromioclavicular Ligament Reconstruction Using a Gracilis Tendon Graft
We present an arthroscopic technique for stabilization of chronic acromioclavicular (AC) joint instability using a transclavicular-transcoracoidal button technique, combined with a coracoclavicular and AC ligament reconstruction using the gracilis tendon. This arthroscopic technique achieves an anatomic reduction of the clavicle without further implant removal. It ensures vertical and horizontal stabilization of the AC joint. Using a horizontal drill hole through the clavicle and looping the gracilis tendon graft around the coracoid avoids weakening of the coracoid with the risk of fracture.Arthroscopic Distal Clavicle and Medial Border of Acromion Resection for Symptomatic Acromioclavicular Joint Osteoarthritis
Acromioclavicular joint osteoarthritis can lead to persistent shoulder pain. Distal clavicle excision is the most common operative procedure in patients with failed, conservative symptomatic acromioclavicular joint osteoarthritis treatment, with some reports of complications. This report describes an alternative procedure that can be used to excise the distal clavicle together with the medial border of the acromion. This technique is a simple procedure because the standard distal clavicle excision can preserve the acromioclavicular ligament, as well as the joint capsule, and achieve an adequate resection length.Arthroscopic Acromioclavicular Joint Reconstruction Using Knotless Coracoclavicular Fixation and Soft-Tissue Anatomic Coracoclavicular Ligament Reconstruction
Acromioclavicular joint injuries are one of the most common shoulder injuries, and there are a variety of treatment options. Recently, there have been newer arthroscopic techniques that have addressed coracoid and clavicle fracture risk by using a knotted suture-button fixation through a single, small bone tunnel with additional looped soft-tissue graft stabilization. Although clinical outcomes have been good to excellent, there have still been instances of knot and hardware irritation. The described technique builds on the latest advances and achieves an anatomic coracoclavicular (CC) reconstruction through a single knotless CC fixation device with additional soft-tissue allograft reconstruction of the CC ligaments.Arthroscopically Assisted Acromioclavicular and Coracoclavicular Ligament Reconstruction for Chronic Acromioclavicular Joint Instability
Acromioclavicular (AC) joint injuries are common injuries, especially in the young and active, male population. AC joint injuries account for 12% of all injuries of the shoulder girdle in the overall population. Although conservative treatment is recommended for Rockwood type I and type II injuries, there is controversial debate about optimal treatment for type III injuries. High-grade injuries are typically treated operatively to avoid painful sequelae. A vast number of different surgical methods have been described over the past few decades.Arthroscopic Distal Clavical Resection Using “Vis-à-Vis” Portal
Arthroscopic distal clavicle resection has become an increasingly popular procedure in orthopaedics, and various techniques have been published. Many of the arthroscopic distal clavicle resection techniques that have been reported require visualization from the lateral portal with an anterior working portal to perform the resection. While these techniques have reported high success rates, there is often difficulty in viewing the entire acromioclavicular joint from the 2 standard arthroscopic portals (lateral and anterior).Arthroscopic Reconstruction of the Coracoclavicular Ligaments Using a Coracoid Cerclage Technique
This technical note discusses the arthroscopic coracoid cerclage technique for double-bundle coracoclavicular ligament reconstruction in patients with nonacute symptomatic high-grade acromioclavicular separation injuries. This technique allows for an anatomic graft reconstruction of the coracoclavicular ligaments through an arthroscopic approach without the requirement to drill into the coracoid process. Early results are promising with high patient satisfaction and excellent reported clinical and radiographic outcomes.Acromioclavicular Joint Reconstruction
Our technique for acromioclavicular joint reconstruction provides a variation on coracoclavicular ligament reconstruction to also include acromioclavicular ligament reconstruction. An oblique acromial tunnel is drilled, and the medial limb of the gracilis graft, after being crossed and passed beneath the coracoid and through the clavicle, is passed through this acromial tunnel and sutured to the trapezoid graft limb after appropriate tensioning. Tenodesis screws are not placed in the bone tunnels to avoid graft fraying, and initial forces on the graft are offloaded with braided absorbable sutures passed around the clavicle.Arthroscopic Anatomic Coracoclavicular Ligament Repair Using a 6-Strand Polyester Suture Tape and Cortical Button Construct
Acromioclavicular separations are common injuries. Low-grade separations are typically managed with nonoperative treatment. However, surgical treatment is recommended for high-grade separations, as well as for chronic low-grade separations that remain symptomatic. Multiple fixation techniques have been described over the past several decades, including Kirschner wires, hook plates, and coracoclavicular screws. More recently, a single-tunnel suture-graft repair and an anatomic reconstruction reproducing both the conoid and trapezoid ligaments have been described.Horizontal and Vertical Stabilization of Acute Unstable Acromioclavicular Joint Injuries Arthroscopy-Assisted
We describe the technical aspects of an arthroscopy-assisted procedure indicated for the management of acute unstable acromioclavicular joint injuries, consisting of a synthetic augmentation of both the coracoclavicular and acromioclavicular ligaments, that anatomically reproduces the coracoclavicular biomechanics and offers fixation that keeps the torn ends of the ligaments facing one another, thus allowing healing of the native structures without the need for a second surgical procedure for metal hardware removal.Arthroscopic-Assisted Management of Unstable Distal-Third Clavicle Fractures: Conoid Ligament Reconstruction and Fracture Cerclage With Sutures
Surgical treatment is usually indicated for the management of Neer type IIB fractures of the distal third of the clavicle. These unstable injuries have shown a rate of nonunion that oscillates around 30% to 45% when managed conservatively, and surgical strategies often require a second operation for implant removal. We describe an arthroscopic-assisted technique for the treatment of Neer type IIB unstable distal-third clavicle fractures that overcomes the issues related to open surgery, metal hardware, and implant irritation.Arthroscopically Assisted Treatment of Acute Dislocations of the Acromioclavicular Joint
Arthroscopically assisted treatments for dislocations of the acromioclavicular joint combine the advantages of exact and visually controlled coracoid tunnel placement with the possibility of simultaneous treatment of concomitant injuries. The clinical results of previous arthroscopically assisted techniques have been favorable at midterm and long-term follow-up. The presented surgical technique combines the advantages of arthroscopically positioned coracoclavicular stabilization with an additional suture cord cerclage of the acromioclavicular joint capsule for improved horizontal stability.Arthroscopically Assisted Anatomic Coracoclavicular Ligament Reconstruction Technique Using Coracoclavicular Fixation and Soft-Tissue Grafts
Acromioclavicular joint injuries are common and are often seen in contact athletes. Good to excellent clinical results have been reported using soft-tissue grafts to reconstruct the coracoclavicular ligaments; however, complications remain. Some complications are unique to the surgical technique, particularly clavicle and coracoid fractures that are associated with drilling large or multiple bone tunnels. The described technique allows for an anatomic coracoclavicular reconstruction using a large soft-tissue graft while minimizing the risk of clavicle fracture by avoiding large bone tunnels.All-Arthroscopic Technique for Reconstruction of Acute Acromioclavicular Joint Dislocations
Acromioclavicular joint dislocations are a common injury particularly among contact sports players. There has been an increasing trend toward arthroscopic management of these injuries. To date, these reconstructions have primarily addressed superoinferior instability by reconstructing the coracoclavicular ligaments. We describe an all-arthroscopic technique for reconstruction of the coracoclavicular ligaments using Arthrex ABS TightRopes (Arthrex, Naples, FL), with additional stabilization of the superior acromioclavicular joint capsule using an anchor-based suture bridge to address anteroposterior instability.Arthroscopic-Assisted Acromioclavicular Joint Reconstruction Using the TightRope Device With Allograft Augmentation: Surgical Technique
Surgical management of acromioclavicular (AC) joint separations remains challenging, especially in the revision setting. Most commonly, Rockwood type I and II injuries are managed nonoperatively whereas type IV, V, and VI injuries are managed with surgery. Type III separations are more controversial, with evidence supporting both nonoperative and operative treatment options. Multiple different arthroscopic techniques have been described; however, there is no current gold standard. AC joint reconstruction with the TightRope device (Arthrex, Naples, FL) with the patient in the lateral decubitus position is a method of restoring joint stability that allows for a minimally invasive, low-profile fixation construct using a single drill hole through the clavicle.Arthroscopically Assisted Reconstruction of Acute Acromioclavicular Joint Dislocations: Anatomic AC Ligament Reconstruction With Protective Internal Bracing—The “AC-RecoBridge” Technique
An arthroscopically assisted technique for the treatment of acute acromioclavicular joint dislocations is presented. This pathology-based procedure aims to achieve anatomic healing of both the acromioclavicular ligament complex (ACLC) and the coracoclavicular ligaments. First, the acromioclavicular joint is reduced anatomically under macroscopic and radiologic control and temporarily transfixed with a K-wire. A single-channel technique using 2 suture tapes provides secure coracoclavicular stabilization.Anatomic Reconstruction of Chronic Coracoclavicular Ligament Tears: Arthroscopic-Assisted Approach With Nonrigid Mechanical Fixation and Graft Augmentation
It has recently been suggested that all coracoclavicular ligament tears could be considered for surgery because nonoperative management might result in irreversible changes in the scapular position that could lead to muscle kinematic alterations that would perturb the shoulder girdle function and result in pain. In this technical note we describe an anatomic technique for the treatment of chronic coracoclavicular ligament tears that overcomes the issues related to open surgery, metal hardware, the inferior resistance to secondary displacement of only grafting and nonanatomic techniques, and the saw effect and anterior loop translation that can be seen in systems that surround the base of the coracoid.
